Hubwinde Classic with Dyneema Line
1,498.00 €
Hubwinde Classic with Dyneema Line

SwissTech Personal Winch « Classic » with Dyneema Line

 

The versatile person-, work- and rescue-winches

 

  • GS tested
  • Safety lift and lower of a person
  • Gear ratio: 1: 10
  • Solid material and workmanship
  • Two designs available
  • Multi-purpose
  • Produced since more than 10 years
  • Small floor space required (bag as accessories available)

 

 

The patented SwissTech persons-, work- and rescue-winches work like a chain block and tackle. A Dyneema-Line rolled up on a drum lifts the weight of the body, the person is absolutely secured anytime. By pulling on one side of the endless rope you pull yourself up, by pulling the other side you come down. The reduction of 1:10 holds the effort very low.

With the integrated duplicate-protection in the winch, you are secured on each height and you are always able to use the infinitely variable speed transmisson for up- and down movements. The Winch can be used even more versatile.

 

The SwissTech «Classic» is tested and admitted according to BGR 159 (securityregulating for high-ductile person-reception methods).

 

2 sizes available:

- 13 m Lifts

- 25 m Lifts

 

Possibilities

  • Shaft inspections
  • facade-repairs / -cleanings
  • Inspections of silos etc.
  • Person-rescue
  • Fire brigade, communities, cable railways
  • Mining and mast-construction
  • Scaffolding
  • Horticulture and forestry

 

The patented SwissTech work- and rescuewinches allow a versatile use. Whether at facades (S-Klasse), in shafts or for person-rescue - the handy SwissTech winches can be used everywhere. The Personal Winch can be used individually or with the help from another person.

 

Rule of the examining board

According to rules of the professional association (UVV) an additional crash protection must always be installed during use with a winch!

 

The SwissTech....... simple, sure, compact!



Technical Data

Operation height
 
Article No. 3003
«Classic»
13 m
     
 
Article No. 3004
«Classic»
25 m
     
Gear ratio
Generally
1 :10
(Body-weight 80 Kg = power of traction 8 Kg)
Max. permitted load
150 Kg
Weight
«Classic» 13 m
6.7 Kg
«Classic» 25 m
7.6 Kg
Measurements
13 m Design
Ø = 165 mm
l = 215 mm
25 m Design
Ø = 185 mm
l = 215 mm
Carrying rope
Dyneema Line  Ø 6 mm
Safety weight load
2100 daN (Kausche approx. 1800 daN)
Material (outside parts)
Stainless-steel, aluminium, plastic
Material (inside parts)
High-quality steel, aluminium
Miscellaneous
Integrated double safety device. All the drive units are installed with needle rollers and are spray-water protected.
Important
The suspension point of the winch must be able to carry at least a minimum of 750 Kg. The guidelines of the professional association of Germany are valid. (GS-HZII-01)
Testing numbers: EG Maschinenrichtline 98/37/EG. Angewandte harmonisierte Normen: EN ISO 12100-1,-2 Sicherheit von Maschinen
«Classic»
BG 09.022
   

 

 

Available Options:

Personal Winch Classic Dyneema:
Additional Images
I_Hubwinde an Fernsehturm
I_Hubwinde mit 3-Bein
I_Hubwinde mit Prüfer1
I_Arbeitssitz mit Fusstütze
I_Auffanggerät Stopfor Set komplett
I_Classic Dyneema Seilaustritt